ZW-A35 Double PE Coated Paper Bowl Machine

  • Description

Technical Specification:

Model ZW-A35 Double PE Coated Paper Bowl Machine
Paper Bowl Size 20 oz-50 oz (mold exchangeable) height up to 125 mm
Raw Material 140-450 g/㎡One-side or two PE (polyethylene) film coated/laminated paper
Rated Productivity 35-45 pieces/minute;
Power Source 380V 50Hz or other required
Total Power 6 KW
Total Weight 2500KG
Package Size(L x W x H) 2830 x1450 x1900mm;
Electric Control Box 1050×570 x750mm;
Working Air Source 0.6Mpa, Air Out-put:0.6 m3/minute
Available to make any special size paper bowl machine and mould

The parts we used VS normal one
1) The Gear Box we use is 140 type, Normal one is 125 type.
140 type is much bigger and stronger than 125 type.
2) We use two Gear Box (one is 140 type and another one 100 type), normally one gear box is used in the paper bowl machine.
However one gear box is not stable as two. We use two, so it will not easily move after it is used for a long time.

3) image003 As showed above, we use two tension bars, while normally one is used.
Two make this part balanced, it will not swing after a long time.

Free Accessories List

Number Name and description Quantity Note
1 Electric heater punching bottom (Short) 1pc image045
2 Copper Immersion Heater  (Long) 1 pc
3 Spanner 1pc image047
4 Big spring 1 pc image049
5 small spring 3pcs
6 Bottom knurling heater 1 pc image051
7 Pre-heater 2 pc image053
8 bearing(5204) + Knurling wheel 1 set
9 inner hexagonal spanner 1 set image055
10 outer hexagonal spanner 1 set image057
11 bottom screw M16 6 pcs
12 oil gun 1 pc image059
13 Neon-electroscope 1 pc image061
14 Screw driver 1 pc image063
15 Hammer 1 pc  image065
16 Machine spanner 1 pc image067
17 Makintosh image069
18 Box spanner 12-14  17-19 image071
19 Pincers 1 pc image073
20 Rubber of silica gel (Red 3pcs , white 2pcs ) 5 pcs  image075 image077
21 Hexagonal screw 6,8,10,12 — each 2pcs 8 pcs image078
22 flat shim D12-D16、12 Nut 10 pcs image080
23 operation manual 1 pc image082
24 instruction of inverter 1 pc image084

Samples of the cups made:

ZW-A35-1  ZW-A35-2
 Noodle Box  Paper Bowl

Need to change mould if you want to make both kinds of cups above.

Your Name (required)

Your Email (required)

Your Message