DTJ-135 Paper Cup Machine

  • Description

    H12 series Paper cup forming machine is an automatic machine with multi-working station, which has the function of photocell detection, failure alarm, counter and the advantages of humanism design, safer operation and easy maintenance.

  • Additional Information
    Weight 4500 kg
    Dimensions 3700 x 1500 x 2200 mm

Technical Specification:

Model DTJ-135 Automatic Paper Cup Machine
Paper Cup Size 135 oz
Raw Material One-side PE (polyethylene) film coated / laminated paper
Suitable paper weight 180-400gsm
Rated Productivity 20-30 pcs/ minute
Power Source 220V/380V 50Hz or other required
Total Power 9KW
Total Weight 4500KG
Package Size(L x W x H) 3700 x1500 x2200mm
Working Air Source 0.4Mpa, Air Out-put:0.6 m3/minute
Making Double PE coated paper cups, need to buy an air compressor

The part we used:
1. Paper Feeding Process:

DTJ-64-1

8 Suckers used to make sure, it is power enough to get big fan easily.

2. Ultrasonic heating.

DTJ-64-2

3. We use two gear boxes, which has two years warranty.
180 type+ 100 type Gear Box

180 type gear box is much bigger than 140 type gear box. This machine is very big, so if the gear box is small, then it cannot hold such heavy machine, when it works, not so stable. So we use one 180 type gear box and one 100 type gear box , then it is strong enough to support the machine work stably.

image011

4. We use 120 type Speed reducer
120 type speed reducer is more stable than normal one.

image013

The speed reducer and the gear box are very important to the machine. They control the whole machine, if there are some problems with these two parts, then, you have to change the gear box and speed reducer. In this case, the machine should be taken apart, because they are inside the machine. It takes much time, and sometimes you cannot install the machine correctly. So it is necessary to use better gear box and speed reducer.

5. We useφ30 import steel shaft for the machine.
Normally φ25 steel shaft is used.

ZBJ-H16-1

φ30 steel shaft has longer life and is resistant to wear.

6. We use 3 Cam to control the folding process.
Normally 1 Cam is used to control the folding process.

DTJ-64-3

Each Cam control each arm, folding process is more accurate and easy to adjust.

7. We use two times paper feeding process.
Normally one time paper feeding process is used.

DTJ-64-4

Two time feeder make feeding and folding has more time to done process.
Paper fan not easy corrugated when fan goes folding process.

8. We use multilayer suckers for the paper taking
Normally single sucker is used.

ZBJ-H12-8
Multilayer sucker is much powerful and make the process successful.
Multilayer sucker has long life; when the top is wornout, just cut the top.

9. Ultrasonic:  EVER GREEN

image031

10. AC DRIVE- company make & capacity: EURA (Brand)
11. More details of machine:

DTJ-64-5

Free Accessories List

Number Name and description Quantity Note
1 Electric heater punching bottom (Short) 1pc image045
2 Copper Immersion Heater  (Long) 1 pc
3 Spanner 1pc image047
4 Big spring 1 pc image049
5 small spring 3pcs
6 Bottom knurling heater 1 pc image051
7 Pre-heater 2 pc image053
8 bearing(5204) + Knurling wheel 1 set
9 inner hexagonal spanner 1 set image055
10 outer hexagonal spanner 1 set image057
11 bottom screw M16 6 pcs
12 oil gun 1 pc image059
13 Neon-electroscope 1 pc image061
14 Screw driver 1 pc image063
15 Hammer 1 pc  image065
16 Machine spanner 1 pc image067
17 Makintosh image069
18 Box spanner 12-14  17-19 image071
19 Pincers 1 pc image073
20 Rubber of silica gel (Red 3pcs , white 2pcs ) 5 pcs  image075 image077
21 Hexagonal screw 6,8,10,12 — each 2pcs 8 pcs image078
22 flat shim D12-D16、12 Nut 10 pcs image080
23 operation manual 1 pc image082
24 instruction of inverter 1 pc image084

Your Name (required)

Your Email (required)

Your Message