QHTB-A12 Paper Cup Machine with Online Handle Applicator
-
Description
Machine VideoQHTB-A12 cups stick handle a whole machine on the basis of the original paper cup machine, increase the handle function, use paper tape feeder, paper handle work automatic feeding, automatic die-cutting, automatic gluing, is in the same industry first.
Main technical parameters
| Model | QH-TB-A12 Single PE Paper Cup Machine with Online Handle |
| Price | Without Ultrasonic: USD 12700 per set |
| With Ultrasonic: USD 14200 per set | |
| Paper Materials | 200-300g/m2 |
| Production Speed | 35-45pcs/min |
| Electric Source | 380v/220v/ 50Hz |
| Total Power | 6kw |
| Weight | 1700kg |
| Overall Dimensions | 2850mm*1050mm*1580mm（L*W*H） |
The part we used VS normal one:
1) We use 125 type gear box, which has two years warranty.
Normally, 100 type gear box is used.
* 125 type is much bigger and stronger than 100 type.
* 100 type gear box, if used for one year, is easier to have problem.
2) We use 1:30 100 type Speed reducer
Normally 1:20 80 type speed reducer is used.
* 1:30 100 type speed reducer is more stable than 1:20 80 type speed reducer.
The speed reducer and the gear box are very important to the machine. They control the whole machine, if there are some problems with these two parts, then, you have to change the gear box and speed reducer. In this case, the machine should be taken apart, because they are inside the machine. It takes much time, and sometimes you cannot install the machine correctly. So it is necessary to use better gear box and speed reducer.
3. We use multilayer suckers for the paper taking
Normally single sucker is used.
* Multilayer sucker is much powerful and make the process successful.
* Multilayer sucker has long life; when the top is worn out, just cut the top.
* When the sucker is broken, can easily remove one layer and then the sucker can be used again, because it has many layers.
Free Accessories List:
| Number | Name and description | Quantity | Note |
| 1 | Electric heater punching bottom (Short) | 1pc |  |
| 2 | Copper Immersion Heater （Long） | 1 pc | |
| 3 | Spanner | 1pc |  |
| 4 | Big spring | 1 pc |  |
| 5 | small spring | 3pcs | |
| 6 | Bottom knurling heater | 1 pc |  |
| 7 | Pre-heater | 2 pc |  |
| 8 | bearing(5204) + Knurling wheel | 1 set | |
| 9 | inner hexagonal spanner | 1 set |  |
| 10 | outer hexagonal spanner | 1 set |  |
| 11 | bottom screw M16 | 6 pcs | |
| 12 | oil gun | 1 pc |  |
| 13 | Neon-electroscope | 1 pc |  |
| 14 | Screw driver | 1 pc |  |
| 15 | Hammer | 1 pc |  |
| 16 | Machine spanner | 1 pc |  |
| 17 | Makintosh |  |
|
| 18 | Box spanner 12-14 17-19 |  |
|
| 19 | Pincers | 1 pc |  |
| 20 | Rubber of silica gel （Red 3pcs , white 2pcs ） | 5 pcs |   |
| 21 | Hexagonal screw 6,8,10,12 — each 2pcs | 8 pcs |  |
| 22 | flat shim D12-D16、12 Nut | 10 pcs |  |
| 23 | operation manual | 1 pc |  |
| 24 | instruction of inverter | 1 pc |  |
